THE REASON WHY THE BIOMASS PELLET MACHINE PRODUCES POWDER AND FAILS TO FORM

Ⅰ.The Ring Die has reached the wear cycle ▷ Need to replace Ring Die

Ⅱ. The Roller has reached the wear cycle ▷ Need to replace Roller

Ⅲ. The type of raw material changes, the raw material is replaced, and the compression ratio is inappropriate ▷ Don't change the type of raw materials at will

Ⅳ. Moisture changes, such as rainy weather ▷ Pay attention to the preservation of raw materials

Ⅴ. Raw material is too dry ▷ Use a material that is easier to form to cover the mold hole first

Ⅵ. Roller does not rotate ▷ ①The oil supply is not timely and the oil in the Roller Bearings burns out ②The gap between the Roller Bearing and the Roller Shell is too large

Ⅷ. Roller gap is not suitable ▷ Normal 0.1-0.15MM