The main differences between the flat die reducer pellet machine and the feed coupling pellet machine are the transmission mode and structural design, as follows:

1. Transmission mode

Flat die reducer pellet machine: Through the reducer transmission, the reducer converts the high-speed rotation of the motor into low-speed high-torque output, which is suitable for processing hard or high-density materials.

Feed coupling pellet machine: The motor and the pressure roller are directly connected by a coupling, with a simple structure, suitable for processing soft or low-density materials.

2. Structural design

Flat die reducer pellet machine: The structure is complex, including reducer, motor, flat die and pressure roller, with a large volume, but stable operation and low noise.

Feed coupling pellet machine: The structure is simple, mainly composed of motor, coupling, flat die and pressure roller, with a small volume, but the vibration and noise are large during operation.

3. Applicable scenarios

Flat die reducer pellet machine: Suitable for occasions requiring high torque, such as processing hard materials or large-scale production.

Feed coupling type pellet machine: suitable for low torque requirements, such as processing soft materials or small-scale production.

4. Maintenance and cost

Flat die reducer type pellet machine: complex maintenance, high cost, but long life, suitable for long-term use.

Feed coupling type pellet machine: simple maintenance, low cost, but relatively short life, suitable for short-term or small-scale use.

Summary

Flat die reducer type pellet machine: suitable for high torque, large-scale production, complex structure, high cost.

Feed coupling type pellet machine: suitable for low torque, small-scale production, simple structure, low cost.